新增“将服务安装为 Linux Systemd 服务”中文和英文文档链接。 (#28)

.vitepress/config/cn.ts

@@ -23,6 +23,7 @@ export const cn = defineConfig({
           { text: '无公网IP', link: '/guide/network/networking-without-public-ip' },
           { text: '使用 WireGuard 客户端接入', link: '/guide/network/use-easytier-with-wirefuard-client' },
           { text: '注册为windows服务(开机自启)', link: '/guide/network/install-as-a-windows-service' },
+          { text: '将服务安装为 Linux Systemd 服务', link: '/guide/network/install-as-a-systemd-service' }, 
           { text: '其他配置', link: '/guide/network/configurations' },
         ],
       },

.vitepress/config/en.ts

@@ -23,6 +23,7 @@ export const en = defineConfig({
           { text: 'Without Public IP', link: '/en/guide/network/networking-without-public-ip' },
           { text: 'Use WireGuard Client', link: '/en/guide/network/use-easytier-with-wirefuard-client' },
           { text: 'Installing as a Windows Service (Auto-Start on Boot)', link: '/en/guide/network/install-as-a-windows-service' },
+          { text: 'Installing as a Linux Systemd Service', link: '/en/guide/network/install-as-a-systemd-service' },
           { text: 'Other Configurations', link: '/en/guide/network/configurations' },
         ],
       },

en/guide/network/install-as-a-systemd-service.md

@@ -0,0 +1,34 @@
+# Installing as a Linux Systemd Service
+
+On Linux distributions that support systemd, you can configure the service to start automatically with the system by following these steps:
+
+1. Create a new service file at `/etc/systemd/system/easytier.service` and modify the command line parameters after `ExecStart` as needed.
+
+```shell
+[Unit]
+Description=EasyTier Service
+After=network.target syslog.target
+Wants=network.target
+
+[Service]
+Type=simple
+ExecStart=/root/easytier-core --ipv4 x.x.x.x --network-name xxx --network-secret yyy --peers tcp://peer_host:11010
+
+[Install]
+WantedBy=multi-user.target
+```
+
+2. After saving the file, run the following command in the terminal to enable the service:
+
+```sh
+systemctl enable easytier.service
+```
+
+3. You can start and stop the service using the following commands:
+
+```sh
+systemctl start easytier.service
+systemctl stop easytier.service
+```
+
+Please note that using the `systemctl` command instead of the `service` command is the more modern approach, and it is recommended to use it on systems that support systemd.

guide/network/install-as-a-systemd-service.md

@@ -0,0 +1,34 @@
+# 将服务安装为 Linux Systemd 服务
+
+在支持 systemd 的 Linux 发行版中，可以通过以下步骤将服务配置为随系统启动：
+
+1. 创建新的服务文件 `/etc/systemd/system/easytier.service`，并根据需要修改 `ExecStart` 后面的命令行参数。
+
+```shell
+[Unit]
+Description=EasyTier Service
+After=network.target syslog.target
+Wants=network.target
+
+[Service]
+Type=simple
+ExecStart=/root/easytier-core --ipv4 x.x.x.x --network-name xxx --network-secret yyy --peers tcp://peer_host:11010
+
+[Install]
+WantedBy=multi-user.target
+```
+
+2. 保存文件后，在命令行中执行以下命令以启用服务：
+
+```sh
+systemctl enable easytier.service
+```
+
+3. 启动和停止服务可以使用以下命令：
+
+```sh
+systemctl start easytier.service
+systemctl stop easytier.service
+```
+
+请注意，使用 `systemctl` 命令替代 `service` 命令是更现代的做法，建议在支持 systemd 的系统中使用。