easytier.github.io/en/guide/network/network-to-network.md

Network to Network

The network topology of network to network is shown in the figure

flowchart LR

subgraph Node A
nodeA[EasyTier</br>10.144.144.1]
end

subgraph Node B
nodeB[EasyTier</br>10.144.144.2]
end

id1[[10.1.1.0/24]]

id2[[192.168.1.0/24]]

id2 <-.Subnet Proxy.-> nodeA <--> nodeB <-.Subnet Proxy.-> id1

id2 -.No EasyTier needed to access the other subnet.-> id1

After the network to network configuration is successful, devices in the 192.168.1.0/24 subnet can communicate with devices in the 10.1.1.0/24 subnet without installing EasyTier.

Linux Network to Network Configuration

To achieve network to network, Node A needs to be the gateway for the 192.168.1.0/24 subnet. The startup and configuration parameters for the two EasyTier nodes are as follows:

Node A

# Start EasyTier and proxy the 192.168.1.0/24 subnet, using a public server to help network
easytier-core -i 10.144.144.1 -n 192.168.1.0/24 -p tcp://public.easytier.top:11010 --network-name n2n_test

# Allow the gateway to forward traffic and configure the firewall to allow traffic forwarding
sysctl -w net.ipv4.ip_forward=1
iptables -A FORWARD -s 192.168.1.0/24 -j ACCEPT
iptables -A FORWARD -d 192.168.1.0/24 -j ACCEPT

Node B

# Start EasyTier and proxy the 10.1.1.0/24 subnet, using a public server to help network
easytier-core -i 10.144.144.2 -n 10.1.1.0/24 -p tcp://public.easytier.top:11010 --network-name n2n_test