# 双节点组网 假设双节点的网络拓扑如下 ```mermaid flowchart LR subgraph 节点 A IP 22.1.1.1 nodeA[EasyTier\n10.144.144.1] end subgraph 节点 B nodeB[EasyTier\n10.144.144.2] end nodeA <-----> nodeB ``` 1. 在节点 A 上执行: ```sh sudo easytier-core --ipv4 10.144.144.1 ``` 命令执行成功会有如下打印。 ```sh $ easytier-core --ipv4 10.144.144.1 Starting easytier with config: ############### TOML ############## instance_name = "default" instance_id = "7294d13c-d119-49ae-a5f7-8c3a912538d7" ipv4 = "10.144.144.1" listeners = [ "tcp://0.0.0.0:11010", "udp://0.0.0.0:11010", "wg://0.0.0.0:11011", ] peer = [] rpc_portal = "127.0.0.1:15888" [network_identity] network_name = "default" network_secret = "" [flags] default_protocol = "tcp" enable_encryption = true enable_ipv6 = true ----------------------------------- xxxx-xx-xx xx:xx:xx: tun device ready. dev: tun0 xxxx-xx-xx xx:xx:xx: new listener added. listener: tcp://0.0.0.0:11010 xxxx-xx-xx xx:xx:xx: new listener added. listener: udp://0.0.0.0:11010 ``` 2. 在节点 B 执行 ```sh sudo easytier-core --ipv4 10.144.144.2 --peers udp://22.1.1.1:11010 ``` 3. 测试联通性 两个节点应成功连接并能够在虚拟子网内通信 ```sh ping 10.144.144.2 ``` 使用 easytier-cli 查看子网中的节点信息 ```sh easytier-cli peer ``` | ipv4 | hostname | cost | lat_ms | loss_rate | rx_bytes | tx_bytes | tunnel_proto | nat_type | id | | :----------- | :------- | :--- | :----- | :-------- | :------- | :------- | :----------- | :------- | :-------- | | 10.144.144.1 | abc-dec | 1 | 3.452 | 0 | 17.33kB | 20.42kB | udp | FullCone | 390879727 | 使用 easytier-cli 查看子网中的路由信息 ```sh easytier-cli route ``` | ipv4 | hostname | proxy_cidrs | next_hop_ipv4 | next_hop_hostname | next_hop_lat | cost | | :----------- | :------- | :---------- | :------------ | :---------------- | :----------- | :--- | | 10.144.144.1 | abc-dec | | DIRECT | | 3.646 | 1 | ---